Engineering Bulletin: Please click here to read news regarding our T710 Thermal Tape
Upon request, Radian's standard and custom
heatsinks can be provided with a variety
of optional accessories. A sample of our
available heatsink accessories include:
Standard
Attachment Options
- EZ Snap Clip Series for BGAs
- Mounting Kits for DC to DC Converters
- Socket 7 & 370 Clips (for Pentium
III, Pentium IV, AMD processors)
|
Standard
Attachment Options
- Radian works with a variety of interface
material providers, including Chomerics,
Furon, Thermstrate, Berquist, Applied
Research (AR) and Graftech
- Although many of our products come with
pre-applied interface materials, the selection
of the materials themselves is left to
the discretion of our customers
Important: T725 Storage and Handling
* T725 thermal pads are installed on the heatsinks in the package.
* The storage and handling guidelines need to be followed.
* Radian can not be responsible for problems caused by improper storage and handling.
=============================================================================================================================
* Do not expose the thermal pads to temperature above 35C.
* Before assembling, remove the top protective liner with a firm, quick, upward “snap” from the pad on the heat sink. Do not peel the pad slowly.
*
Small air bubbles and irregularities on the pads do not adversely affect the function of T725. The reflow and wetting of T725 will occur at temperatures above 58C to achieve optimal thermal performance. This process can take a few thermal cycles.
|
